The CPT is an optional extra, check IQ wiring Diagram for inclusion. When fitted, the CPT provides a factory calibrated 4-20mA position feedback signal. The CPT will automatically range to the set limit positions. Refer to Publication E120E for CPT details.
Note. The set-up of the CPT will also effect the internal feedback signal used by the IQ Folomatic proportional controller. If the set-up of the CPT is changed and Option Folomatic is also included, the Folomatic will require re-calibration.
Use the Get Settings control to load the set-up of the CPT. To change the set up select the required radio button and click the Send Setting control.