IQ Insight Readme - January 2011

Important Note:

Only persons competent by virtue of their training or experience should be allowed to 
install, maintain and repair Rotork actuators.  Work undertaken must be carried out in 
accordance with published manuals.  The user and those working on Rotork actuators 
should be familiar with their responsibilities under any statutory provisions relating 
to Health and Safety of their workplace. In this context it is the responsibility of 
users to limit and control the use of IQ Insight software on site.  If required 
communication between actuators and the software can be disabled and password protected. 
Refer to publication E170E (IQ) and E175E (IQT) available for download from www.rotork.com.


Contents:

  General Information
  Minimum PC Operating Requirements
.  Installing the IrDA header
  Deleting old versions of IQ Insight
  Loading Insight - Web Download
  Loading Insight - CD
  Running IQ Insight

General Information:

IQ-Insight allows a User to interrogate and set-up an IQ over a PC IrDA serial interface 
(Infra-red Data Association) via a USB-IR header (supplied with the IQ-Insight Kit). 
Information regarding the commissioning and set-up of an IQ can be recorded for complete site records.  
Via IQ-Insight, the on-board IQ Datalogger provides historical incident data as well as 
operational data for informed maintenance scheduling.


Updates to IQ-Insight are available from the Rotork Web site at www.rotork.com. 
Rotork recommend that users access the Rotork Web site to get the latest publications, 
actuator wiring diagrams and contact information.


Minimum PC Operating Requirements:

 Pentium class or equivalent processor (200MHz or better recommended)
 64MB ram 
 800 x 600 monitor resolution
 Microsoft Windows XP or later

It is recommended that when communicating with an IQ actuator, IQ Insight is run in isolation.  
Running multiple applications alongside IQ Insight may cause communication interrupts. 
IQ Insight performance will be subject to PC specification.





Installing the IrDA header:

WARNING: DO NOT PLUG IN THE IRDA HEADER UNTIL REDAING PUBLICATION E119-3E

Failure to follow the installation instructions carefully will result in non-communication.






Deleting old versions of IQ Insight:

Before attempting to install a new version of IQ Insight, ensure any existing versions are 
deleted:
Start, Control panel, Add/Remove (or uninstal) Programs.
From list select IQ-Insight.  Select Add/Remove.  Follow on-screen instructions.  
We recommend that any shared files are deleted.



Loading Insight - Web Download:

Before attempting to install a new version of IQ Insight, ensure any existing versions are 
deleted:

Start, Control panel, Add/Remove (or uninstal) Programs.

From list select IQ-Insight.  Select Add/Remove.  Follow on-screen instructions.  
We recommend that any shared files are deleted.

IQ Insight downloaded from Rotork Website www.rotork.com is a self extracting zip file.  
When prompted, Save to a folder on PC hard disk.

To extract file use the Start, Run feature and browse to folder.  
Select insight.exe and Open. Extract dialog will ask for folder, browse to required folder.  
Select Unzip.

Close dialogue box.

Use the Start, Run feature and browse to folder containing unzipped files.  
Open Insight folder. Select setup.exe and open, In run menu select OK.  Follow instructions.
We recommend start menu program group "rotork" is retained. IQ Insight will be added to 
Program files as IQINSIGHT



Loading Insight - CD:

Before attempting to load a new version of IQ Insight, ensure any existing versions are deleted:

Start, Control panel, Add/Remove (or uninstal) Programs.
From list select IQ-Insight.  Select Add/Remove. Follow instructions.  
We recommend that any shared files are deleted. 

To load use the Start, Run feature and browse to CD drive.  Select Setup and open, 
In run menu select Open.  Follow instructions.  
We recommend start menu program group "Rotork" is retained.
IQ Insight will be added to Program files as IQINSIGHT



Running IQ Insight:

Click - Start, Programs, Rotork, IQ Insight.


IQ insight Main Menu page will open.  Select Log-in control and refer to Insght help.
